32-bit RISC Prozessor SoC

The NXC2610/2620 are low power consumption, 0.28mA/MHz, and high performance, 380MHz, application processors. NXC2610 is designed suitable for embedded handheld devices while NXC2620 adds embedded Ethernet MAC, smart card interface, and PS/2 interface for enhanced stationary applications.

 

Highlights:

• High-performance, ultra low-power 32-bit RISC core at 380Mhz
  Ideal to implement high performance handheld devices such as smart phones and GPS
• External Memory Controller
  Supports low power 1.8V/2.5V/3.3V 32-bit and 16-bit memories. In addition, 8/16-bit NAND flash controller enables NAND flash boot to reduce system cost
• MMC/SD/SDIO
  MMC/SD card interface expands storage support. SDIO interface enables I/O device support (e.g. WiFi)
• PCMCIA/CF/IDE
  Expandable storage interface including IDE hard drive
• USB 1.1 Host/Device
• LCD Controller
  Support TFT LCD up to 800x600 pixels with 65536 colors
• UART/I2S/AC97/I2C/SPI/SSP
• 10/100 Ethernet MAC (NXC-2620)
• FBGA289 package @ 15mmx15mm, ROHS-compliant
• 1.8V core and 3.3V I/O
 

Specifications:

  NXC-2610 NXC-2620
Processor Speed (MHz)
 380 380
LCD Controller
 Y Y
External Memory Controller
 Y Y
USB1.1 Host/Device
 Y Y
SD/MMC/SDIO
 Y Y
I2S/AC97/UART/IrDA
 Y Y
I2C/PWM/SPI/SSP
 Y Y
RTC/WDT/Timer
 Y Y
10/100 Ethernet MAC
 - Y
Smart Card Interface
 - Y
PS/2 Keyboard Interface - Y


NXC-2600 Block Diagram



Applications:

NXC-2610 NXC-2620
• Smart-phones, PDA, WiFi Phone (VOIP, Skype) • Surveillance IP Camera, Digital Photoframe
• GPS, PVR (Personal Video Recorder) • Internet Radio/Audio Player, DVR(Digital Video Recorder)
• Digital Still Camera, Camcorder • VOIP gateway, ADSL Router, IP Video Phone
• PMP (Personal Media Player), MP3 • Industrial Control, Automation, Data Acquisition
• Handheld POS Terminal, Data Collection Computer • Broadband Audio/Video, Car Telematics
• Other handheld devices    
 
 

NXC-2600 Development Kit (DVK2)
Omnipresence DVK2 is a modular development platform designed to demonstrate the
capabilities of the NXC2600 series application processors for handheld and stationary multimedia,
networking, industrial, and other low power vs. performance applications. It consists of two
boards- LCD board and baseboard.

Overview
Omnipresence DVK2 is designed
as a general purpose NXC2620 processor evaluation platform with a rich set of
peripheral interfaces built on the
baseboard for evaluation or together with the ICE for developing embedded H/W
and S/W. It supports OS of Linux as well as Windows CE.
The kit includes the following two boards:

LCD Board
The 5.7 inch TFT LCD panel mounted on the LCD board shows 180nit typical brightness in LED backlight. It is designed to support NXC2600 16-bit color
LCD controller with display pixels of
640(H)x3x480(V). The LCD viewing
angle is up to 140 degrees horizontally. It also supports 4-wire resistance type touch
signal-inputs to make your evaluation and
development tasks easier .

   

Baseboard
We provide standard baseboard
embedded with our NXC2620 application
processor. Our standard baseboard
provides the following I/O interfaces and embedded features:
1. USB1.1 host and device.
2. 10/100 Mbps Ethernet
3. NAND Flash 128MB

4. NOR Flash 8MB
5. SDRAM 64MB
6. UART x2
7. LCD
8. Camera (ITU656)
9. Audio Codec w/ Touch Screen
I/F (Philips UCB1400)
10. SD Card up to 2GB
11. Line out, Mic in, Speaker Header
12. JTAG
If our standard baseboard can’t meet your requirement, please consult with us for customized baseboard design support
Highlights
- Based on IC Nexus’ class leading NXC2600 ultra- low power and high performance application processors
- Rich peripheral support to facilitate your H/W and S/W development
- Windows CE 5.0 and Linux OS support and complete BSP
- Supported by IC Nexus’ skilled FAEs and global channel partners
 

NXC-2620 Evaluation Board (DVK3.1)

By providing hardware and software solution, DVK3 is designed to comprise NXC2620 processor module, baseboard, and LCD board as a developing platform to accelerate time to market easily and immediately for targeting application of HMI, Thin Client, and SBC. DVK3 is an inexpensive, feasible and high performance development kit for evaluating the functionality and capability of NXC2620 processor and system on module.
Processor Module
Flexible and cost-effective solution, 32bit RISC core NXC2620 processor module is a system on module designed to perform low power consumption embedded devices. The OS support includes WinCE 5.0 and Linux 2.6. The onboard PHY simplifies hardware Ethernet connection. Other features are as follows:
1. Small, Compact, SODIMM 200 pin
2. SDRAM 128MB
3. NAND Flash 128MB
4. Ethernet 10/100 with onboard PHY
5. Miscellaneous peripherals
6. JTAG Interface
7. Windows CE 5.0 BSP ready
8. Linux 2.6 BSP ready
NXC-2620 Processor Module Block Diagram
 
LCD Board
The 5.7 inch TFT LCD panel mounted on the LCD board shows 180nit typical brightness in LED backlight. It is designed to support NXC2600 16-bit color LCD controller with display pixels of 640(H)x3x480(V). The LCD viewing angle is up to 140 degrees horizontally. It also supports 4-wire resistance type touch signal inputs to make your evaluation and development tasks easier.
 

Base Board

The baseboard is a standard reference design environment to fulfill NXC2620 processor and system on module.
The following I/O and interfaces are embedded features built on the baseboard:
1. Digital LCD interface
2. SM502 GPU
3. USB1.1 Host x 4ports,
3. USB1.1 Device x 1port
4. SD/MMC/SDIO
5. IDE Interface
6. Analog VGA Interface
6. (up to 1280x1024 pixels)
7. Camera Interface
8. RTC/WDT/Timer
9. I2C/PWM/SPI/SSP
10. I2S/AC97/UART/IrDA

NXC-2620 DVK3.1 Block Diagram